Filtration, regulation and treatment of compressed air, Page 2
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 1/2" version can filter 4,000 l/min of air compressed to a...
Fixing angle for air handling units A2F-14, A2L-14. Attachment of filters and lubricator of A2F units to the unit body.
Air treatment units A1. Simple compressed air control with AFR air filtration pressure regulators in 3/8" design with 2000 l/min air flow. Included in the delivery is a pressure...
Compressed air treatment units in metal design with inlet up to 18 bar. Compressed air control 0 - 12 bar with a flow rate of 4,500 l/min in 1" size. Application mainly in...
Replacement microfiltration cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-335 microfilters. Recommended replacement 12 months or every 4,000 MH and when...
Connection kit allowing the connection of two components from the B2 series of treatment units such as regulator, filter, lubricator of size 2.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/8"-1/2" as replacement insert for FDM and FWA air filters.
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 3/8" version can filter 1,500 l/min of air compressed to a...
Mounting angle for mounting 1/4" size units. Accessories and spare parts for METAL WORK air treatment units.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 5 um for filter size 3/8"-1/2" as replacement insert for FDM and FWA air filters.
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 35 m³/hr (583 l/min) and connection via external thread G 1/2"....
Air treatment units A1. Air lubrication for pneumatic tools and automation technology. Oil in the air extends the life of pneumatic components. Lubricator design 1/2" with air...
AAFC cyclone separator in 1/2" design with a flow rate of 1,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Compressed air treatment units in plastic design up to 13 bar. Compressed air regulation from 0 to 8 atmospheres with a maximum flow rate of 600 l/min. Connection via 1/4" pipe...
Air treatment units A1. Air lubrication for pneumatic tools and automation technology. Oil in the air extends the life of pneumatic components. 3/8" lubricator design with air...
Replacement oil seal for METAL WORK compact filters size 1/8" - 1/4".
Replacement cartridge WOS-8A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 8000 l/min.
Air treatment units A1. Air lubrication for pneumatic tools and automation technology. Oil in the air extends the life of pneumatic components. Lubricator design 1/4" with air...
Connection kit allowing the connection of two components from the B2 series of treatment units such as regulator, filter, lubricator of size 1.
The set allows the combination of 3 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Standard connection set for FUTURA size 1 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
Mounting bracket with size 1 lock nut for FUTURA air handling units. Installation for pressure regulator or pressure regulator with filter. Simple attachment with a bracket. The...
The set allows the combination of 2 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
Connection set of FUTURA air handling units with wall bracket size 1. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...
Replacement diaphragm for A2 - A2MR-38 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...
Compressed air treatment units in metal design up to 18 bar. Lubricator in 1" size with a flow rate of up to 16,000 l/min for compressed air lubrication of e.g. pneumatic tools....
Fixing angle for air handling units A2F-12, A2L-12. Attachment of filters and lubricator of A2F units to the unit body.
Replacement container for filter unit A2 - A2NF-12. Simple container change with lock on the following units: A2F-12, A2S-12, A2U-12.
Replacement diaphragm for A2 - A2MR-12 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...
Float valve for condensate discharge from compressed air system working on float principle. Version AOK16B for internal mounting of filter vessels using 1/2" thread.
Size 2 mounting nut for FUTURA air treatment units such as pressure regulator or pressure regulator with filter. For mounting the angle for fixing the unit.
Metal grease gun up to 18 bar with a flow rate of 4,500 l/min in size 2 with 1/2" thread for efficient oil mist doses for lubricating pneumatic tools or drives on production...
Replacement diaphragm for A2 - A2MR-10 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...
Air pressure regulator in metal design up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Application...
AAFS 1/4" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...
The ADRY-12 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 200 l/min. Reduces the pressure dew point...
Dust filter AAFR in 1/2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 1/4" version can filter 750 l/min of air compressed to a...