Filtration, regulation and treatment of compressed air, Page 12
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Hankison filter cartridge for SF series air filter type F06. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...

Hankison filter cartridge for SF series air filter type F07. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...

Air treatment units A1. Air lubrication for pneumatic tools and automation technology. Oil in the air extends the life of pneumatic components. 3/8" lubricator design with air...

The ADRY-105 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,750 l/min. Reduces the pressure dew point...

The ADRY-24 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 400 l/min. Reduces the pressure dew point down...

Simple mechanical device for checking the condition of the filter cartridge. Contributes to reducing power consumption by alerting to high pressure gradients. If the filter...

Compressed air condensation dryer for dew point +3°C. The maximum inlet pressure is 14 bar with a flow rate of up to 144 m³/hr (2,333 l/min) and a G1" male thread connection....

Compressed air condensation dryer for dew point +3°C. The maximum inlet pressure is 14 bar with a flow rate of up to 180 m³/hr (3,000 l/min) and connection via a G1" male...

Compressed air condensation dryer for dew point +3°C. The maximum inlet pressure is 14 bar with a flow rate of up to 235 m³/hr (3,916 l/min) and a G1" male thread connection....

Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 300 m³/hr (5,000 l/min) and connection via G1 1/4" male thread....

Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 50 m³/hr (833 l/min) and connection via G3/4" male thread. The...

AAFP basic filter in 3/4" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...

Designed to accurately display the pressure gradient value of the filter cartridge. Dial with coloured fields - red to indicate both wear and tear of the insert. Optimized...

AAFR dust filter in 1 1/2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for...

The filters are used to remove the largest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Body with easily removable container and...

Electronic IEDs are primarily designed to drain condensed water from filter vessels. Equipped with LED indicator and test button. Operating temperature +1,5 °C to +65 °C,...

Electronic pressure gauge designed to check and monitor the condition of the filter cartridge. The condition of the filter cartridge is determined by the pressure gradient, the...

Electronic pressure gauge designed to check and monitor the condition of the filter cartridge. The condition of the filter cartridge is determined by the pressure gradient, the...

Hankison filter cartridge for the PF series air filter type F06. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of...

Size 2 mounting nut for FUTURA air treatment units such as pressure regulator or pressure regulator with filter. For mounting the angle for fixing the unit.

Float valve for condensate discharge from compressed air system working on float principle. Version AOK16B for internal mounting of filter vessels using 1/2" thread.

Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 1" thread. Application mainly in industry, laboratory, measuring and control technology.

Metal grease nipples up to 18 bar with a flow rate of 16,000 l/min in size 3 with 1" thread for effective oil mist doses for lubricating pneumatic tools or drives on production...

Lubricator in metal design up to 18 bar with a flow rate of 16,000 l/min in size 3 with 3/4" thread designed for efficient oil mist doses for lubricating pneumatic tools or...

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....

AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...

Removes mechanical dirt up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Air treatment units A1. Simple compressed air control with 1" AR pressure regulators with 8,000 l/min air flow. Included in the delivery is a pressure gauge and fixing angle.

Air pressure regulator in metal design up to 18 bar. Compressed air regulator with a flow rate of 2,600 l/min in size 2 1/2" thread. Regulation range 0 - 12 bar. Application...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Air treatment units A1. Simple compressed air control with pressure regulators with AFR air filtration in 1" design with air flow of 5,500 l/min. Included in the delivery is a...

Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-780. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...

Service kit for condensate evacuator IED for eelectronic IED triggers. The devices are primarily designed to drain condensed water from the filter vessels.

Shut-off valve in 3/8" design with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....