Filtration, regulation and treatment of compressed air, Page 4
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Bestsellers
List of products
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 4,100 l/min. Connection 1/2" pipe thread. Possibility to change...
Basic AFP filters according to ISO 8573.1 with a filtration capacity of 3 um and an efficiency of 99.9%. FPRO filters are used to remove the largest mechanical impurities from...
Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 300 m³/hr (5,000 l/min) and connection via G1 1/4" male thread....
Compressed air treatment unit in metal design up to 18 bar. Lubricating grease fitting in 1/2" size with a flow rate of up to 4,300 l/min for compressed air lubrication of e.g....
Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 3100 l/min in 1/2" size. Application mainly in industry, laboratory,...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow of 1,300 l/min. Connection 1/4" pipe thread. Possibility to change the...
Compressed air treatment units in metal design up to 18 bar. Comprehensive treatment in one 1/4" device with flow rates up to 800 l/min. All the benefits of separate parts....
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 3/4" and outlet pressure regulation 0,5 - 25 Bar. Maximum inlet...
Compressed air condensation dryer for dew point +3°C. The maximum inlet pressure is 14 bar with a flow rate of up to 235 m³/hr (3,916 l/min) and a G1" male thread connection....
Replacement cyclone insert for liquid water filtration AAFC-120V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Compressed air treatment units in plastic design up to 13 bar. Compressed air regulation from 0 to 8 atmospheres with a maximum flow rate of 600 l/min. Connection via 1/8" pipe...
Standard connection set for FUTURA size 1 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
Mounting angle for air handling units A2R-38, A2S-38. Attachment by means of a lock nut on the pressure regulator.
Accessories and spare parts for METAL WORK air treatment units. Mounting angle for mounting units in 3/4"-1" size.
Compressed air treatment unit in metal design up to 18 bar. 3/8" grease gun with a flow rate of up to 4,100 l/min for compressed air lubrication of e.g. pneumatic tools....
Mounting bracket with size 1 lock nut for FUTURA air handling units. Installation for pressure regulator or pressure regulator with filter. Simple attachment with a bracket. The...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-75 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
After one year of operation, the service KIT for the Omega Air adsorption dryer series ADRY-6 to ADRY-36 includes a replacement microfilter cartridge, dust filter and...
After one year of operation, the ADRY-105 series Omega Air adsorption dryer service KIT includes a replacement microfilter cartridge, dust filter and replacement silencers for...
The set allows the combination of 3 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
Mounting angle for mounting 1/4" size units. Accessories and spare parts for METAL WORK air treatment units.
Service KIT after 4 years of operation of the adsorption dryer Omega Air series ADRY-36 includes replacement filter cartridges, silencers, check valve, gaskets, valve kit,...
Dew point sensor including cable - for air saving regeneration - ADRY-OS. A-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-105 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-24 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
Connection set of FUTURA air handling units with wall bracket size 2. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-60 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 3/8" thread. Application mainly in industry, laboratory, measuring and control...
Compressed air treatment unit in metal design up to 18 bar. Lubricator in 1/4" size with a flow rate of up to 1100 l/min for compressed air lubrication of e.g. pneumatic tools....
The set allows the combination of 2 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
Miniature compressed air lubricator in plastic design up to 12 bar with a maximum flow rate of 710 l/min. Connection via 1/4" female pipe thread.
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Replacement filter insert 20 um for compact filters 1/8" - 1/4" as replacement insert for FDM and FWA air filters.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 1/4" as replacement insert for FDM and FWA air filters.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/4"-1" as replacement insert for FDM and FWA air filters.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 5 um for filter size 3/4"-1" as replacement insert for FDM and FWA air filters.
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow of 3,100 l/min. Connection 3/8" pipe thread. Possibility to change the...
Replacement cyclone cartridge for liquid water filtration AAFC-60V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Connection set of FUTURA air handling units with wall bracket size 1. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...