Filtration, regulation and treatment of compressed air, Page 23
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...
Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...
Stainless steel dust filter IHP1R with G1" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working...
Stainless steel dust filter IHP1R with connection thread G1/2" designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum...
The IHP1R stainless steel dust filter with G1/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP1R stainless steel dust filter with G3/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP1R stainless steel dust filter with G3/8" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP2R stainless steel dust filter with G1/2" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP2R stainless steel dust filter with G1/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP2R stainless steel dust filter with G3/8" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP4R stainless steel dust filter with G1/2" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP4R stainless steel dust filter with G1/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP4R stainless steel dust filter with G3/8" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
Working pressure up to 16 bar, maximum flow rate 1300 l/min. Purity class according to ISO 8573.1 : Solid impurities -1, Oil - 1. Residual oil
Stainless steel cyclone separator IHP1 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
Replacement diaphragm for MADRY-44M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.
High pressure regulator 1/4" for pressure reduction of compressed air and other non-volatile and non-toxic gases. Maximum inlet pressure 60 bar with a control range of 3.0 - 50...
Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F02 with 1/4" female thread connection. The filter is...
Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN150 clearance....
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Futura treatment units - Pressure regulators with air filtration, Designed for compressed air with or without oil and for neutral gases, Design according to ATEX II 2G2D,...
Complete three-piece assembly with 1/4" connection and maximum flow rate of 1,400 l/min. Inlet pressure up to 16 bar with control range : 0,1 - 1 bar. It consists of a pressure...
Complete three-piece assembly with 1/4" connection and maximum flow rate of 1,400l/min. Inlet pressure up to 16 bar with control range : 0,1 - 2 bar. It consists of a pressure...
Complete three-piece assembly with 1/4" connection and maximum flow rate of 1,400l/min. Inlet pressure up to 16 bar with control range : 0,2 - 4 bar. It consists of a pressure...
Complete three-piece assembly with 1/4" connection and maximum flow rate of 1,400l/min. Inlet pressure up to 16 bar with control range : 0,5 - 10 bar. It consists of a pressure...
Complete three-piece assembly with 1/4" connection and maximum flow rate of 1,400l/min. Inlet pressure up to 16 bar with control range : 0,5 - 16 bar. It consists of a pressure...
Complete three-piece assembly with 1/4" connection and maximum flow rate of 1,400l/min. Inlet pressure up to 16 bar with control range : 0,5 - 8 bar. It consists of a pressure...
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 180 m³/hr (3,000 l/min) and connection via a G 1" male thread....
PFS microfilter with G2 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 16 bar, maximum...
PFS microfilter with G3" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 12 bar, maximum...
PFS microfilter with G3" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 12 bar, maximum...
Pre-filter WFITI1 with connection thread G2 1/2" for use in areas with high corrosive environment. Filtration capacity up to 1 um. Maximum working pressure up to 16 bar,...
Prefilter WFITI1 with G3" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure up to 12 bar, maximum...
Prefilter WFITI1 with G3" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure up to 12 bar, maximum...
Regulator with inlet up to 25 bar 1" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.6 to 6 bar up to a flow rate of...