Filtration, regulation and treatment of compressed air, Page 3
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Replacement cartridge WOSM-2AP for water-oil separators. Combined filtration with activated carbon and PP cartridge. Residual oil less than 20 ppm. The maximum flow rate is 2000...
Cyclone separator HFC-007 with 1/2" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 50 bar,...
Replacement cyclone cartridge for liquid water filtration AAFC-2160V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...
Air pressure regulator with metal filter up to 18 bar. Compressed air regulator with a flow rate of 2,600 l/min in size 2 thread 3/8". Regulation range 0 - 12 bar. Filtration...
Replacement cartridge WOS-35A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 35 000 l/min.
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Replacement cartridge WOS-35P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 35,000 l/min.
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Water oil FOD separatorsDischarging condensate directly into the sewer is illegal and the condensate must be disposed of as oilWater oil FOD separators separate water and...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Air treatment units A1. Simple compressed air regulation with AR pressure regulators in 3/8" design with air flow of 2 500Air pressure regulator AR14 l/min. Included in the...
Replacement container for lubrication unit A2 - A2NL-38. Simple container change with lock on the following units: A2L-38, A2U-38.
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 1/2" version can filter 4,000 l/min of air compressed to a...
Standard connection set for FUTURA size 1 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Complete air treatment units are used wherever compressed air needs to be regulated, filtered and lubricated. With the complete units, we can obtain compressed air treated to 5...
Fixing angle for mounting of metal compressed air treatment units B2 in size 2 for threads 3/8" - 1/2". Inmade of black painted steel.
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 3/8" version can filter 1,500 l/min of air compressed to a...
AAFC cyclone separator in 3/4" design with a flow rate of 2,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...
Air treatment units A1. Simple compressed air control with pressure regulators with AFR air filtration in 1" design with air flow of 5,500 l/min. Included in the delivery is a...
Electronic condensate drain from a compressed air system up to 16 bar, operating on a timed valve switching. External mounting on the filter body using a 1/2" thread. Simple...
Lubricator in metal design up to 18 bar with a flow rate of 4,500 l/min in size 2 with 3/8" thread for efficient oil mist doses for lubricating pneumatic tools or drives on...
Air treatment units A1. Simple compressed air control with AFR pressure regulators with 1/4" air filtration and 750 l/min air flow. Included in the delivery is a pressure gauge...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 1,500 m³/hour (25,000 l/min) and connection via external...
Condensation dryer for compressed air to +3°C dew point. The maximum input pressure is 14 bar with a flow rate of up to 50 m³/h (833 l/min) and a G1" external thread connection....
Replacement container for filter unit A2 - A2NF-38. Simple container change with lock on the following units: A2F-38, A2S-38, A2U-38.
The air handling unit size 1 air handling unit - B2 allows air sampling with certain parameters inside the modular series. Tapping outlet via 4 x 1/8" thread. Mthe possibility...
Air treatment units A1. Air lubrication for pneumatic tools and automation technology. Oil in the air extends the life of pneumatic components. 3/8" lubricator design with air...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-200 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-36 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
Air treatment units A1. Simple compressed air control with 1/2" AR pressure regulators with 6,000 l/min air flow. Included in the delivery is a pressure gauge and fixing angle.
Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 700 l/min in size 1 with 1/4" thread. Regulation range 0 -...
Metal grease gun up to 18 bar with a flow rate of 4,500 l/min in size 2 with 1/2" thread for efficient oil mist doses for lubricating pneumatic tools or drives on production...
Air pressure regulator with metal filter up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Filtration...
Metal grease gun up to 18 bar with a flow rate of 1,700 l/min in size 1 with 1/4" thread for efficient oil mist doses for lubricating pneumatic tools or drives on production...
Air treatment units A1. Air lubrication for pneumatic tools and automation technology. Oil in the air extends the life of pneumatic components. Lubricator design 1/2" with air...
Mounting angle for mounting 1/4" size units. Accessories and spare parts for METAL WORK air treatment units.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 5 um for filter size 1/4" as replacement insert for FDM and FWA air filters.