Filtration, regulation and treatment of compressed air, Page 4
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Bestsellers
List of products
Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 1/2" thread. Application mainly in industry, laboratory, measuring and control...
The set allows the combination of 3 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
Compact filter for filtration of compressed air from a 20 um compressor up to 13 bar with a maximum flow rate of 1,200 l/min. Connection 1/4" pipe thread. Possibility to change...
Miniature compressed air filter with 20 um filtration in plastic design up to 12 bar with a maximum flow rate of 1,200 l/min. Connection via 1/4" female pipe thread.
Replacement container for METAL WORK compact filters size 1/8" - 1/4".
Replacement container for METAL WORK compact grease guns size 1/8" - 1/4".
Accessories and spare parts for METAL WORK air treatment units. Mounting angle for mounting units in 3/4"-1" size.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 5 um for filter size 3/4"-1" as replacement insert for FDM and FWA air filters.
After one year of operation, the service KIT for the Omega Air adsorption dryer series ADRY-150 to ADRY-200 includes a replacement microfilter cartridge, dust filter and...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 3/4" and outlet pressure regulation 0,5 - 25 Bar. Maximum inlet...
Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 300 m³/hr (5,000 l/min) and connection via G1 1/4" male thread....
Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 75 m³/hr (1,250 l/min) and connection via G3/4" male thread. The...
Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-25 and AAFS-30 microfilters. Recommended replacement 12 months or every 4,000 MH and...
Compact regulator with 20 um filtration for compressed air treatment up to 13 bar. Compressed air control from 0 to 8 bar with a maximum flow rate of 600 l/min. Connection...
Compact regulator with 20 um filtration for compressed air treatment up to 13 bar. Compressed air control from 0 to 8 bar with a maximum flow rate of 600 l/min. Connection...
Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/4"-1" as replacement insert for FDM and FWA air filters.
Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 20 m³/hr (333 l/min) and connection via external thread G3/8"....
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G 1" male thread....
Fixing bracket with screws under the cover of the FUTURA size 2 unit. All modules of FUTURA units can be mounted in this way. Easily mounted with wall bracket and similar mounting.
The ADRY-6 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 100 l/min. Reduces the pressure dew point...
Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 380 m³/hr (6,333 l/min) and connection via G1 1/4" male thread....
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 3/4" and outlet pressure regulation 0,5 - 3 Bar. Maximum inlet...
Air treatment units A1. Simple compressed air control with 1" AR pressure regulators with 8,000 l/min air flow. Included in the delivery is a pressure gauge and fixing angle.
Compact filter for filtration of compressed air from a 20 um compressor up to 13 bar with a maximum flow rate of 1,200 l/min. Connection internal pipe thread 1/8". Possibility...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-24 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
Service KIT after 4 years of operation of the adsorption dryer Omega Air series ADRY-36 includes replacement filter cartridges, silencers, check valve, gaskets, valve kit,...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-75 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Compressed air condensation dryer for dew point +3°C. The maximum inlet pressure is 14 bar with a flow rate of up to 180 m³/hr (3,000 l/min) and connection via a G1" male...
AAFR dust filter in 3/8" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Dew point sensor including cable - for air saving regeneration - ADRY-OS. A-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-105 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-60 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 1 1/2" and outlet pressure regulation 0,5 - 10 Bar. Maximum inlet...
High-flow silencer with external pipe thread G 1" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/8"-1/2" as replacement insert for FDM and FWA air filters.
Replacement filter insert 5 um for compact filters 1/8" - 1/4" as replacement insert for FDM and FWA air filters.