Filtration, regulation and treatment of compressed air, Page 5
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Bestsellers
Measuring chamber for dew point sensor - for regeneration air saving - ADRY-MK. A-DRY dryers can operate in two operating modes depending on the settings of the control unit....
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-105 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-12 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-150 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-24 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-36 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-6 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-60 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Bypass or bypass piping for Omega Air compressed air dryers RDP-140/RDT-140 to RDP-235/RDT-235 for easy maintenance and servicing of the machine.
Bypass or bypass pipe for Omega Air RDP-20/RDT-20 and RDP-35/RDT-35 compressed air dryers for easy maintenance and servicing of the machine.
Bypass or bypass pipe for Omega Air RDP-480/RDT-480 compressed air dryers for easy maintenance and servicing of the machine.
Bypass or bypass pipe for Omega Air compressed air dryers RDP-50/RDT-50 to RDP-100/RDT-100 for easy maintenance and servicing of the machine.
Bypass or bypass piping for Omega Air RDP-600/RDT-600 and RDP-950/RDT-950 compressed air dryers for easy maintenance and servicing of the machine.
The ADRY-12 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 200 l/min. Reduces the pressure dew point...
The TACM-56 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...
AAFC cyclone separator in 1 1/2" design with a flow rate of 8,500 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFS microfilter in 3" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...
The AFS microfilter is used to remove the largest mechanical impurities from compressed air up to 0.01 um according to ISO 8573-1 class 1. Body with easily removable container...
Connection set for easy connection of two or more filters into one block in 1/2" threaded design. Universal design allowing the connection of filters from different...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Removes mechanical dirt up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 9,100 l/min. Connection 3/4" pipe thread. Possibility to change...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-25 and AAFM-30 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Regulator with inlet up to 25 bar 1/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...
Compressed air treatment units in metal design up to 18 bar. Comprehensive treatment in one 1/4" device with flow rates up to 800 l/min. All the benefits of separate parts....
Replacement cartridge WOS-4A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 4000 l/min.
AAFC 2" cyclone separator with a flow rate of 16,667 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 2,500 l/min in 3/8" size. Application mainly in industry, laboratory,...
Replacement cartridge WOS-4P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 4000 l/min.
Compressed air treatment units in metal design up to 18 bar. Lubricating grease gun in 3/4" size with a flow rate of up to 16,000 l/min for compressed air lubrication of e.g....
Compressed air treatment units in plastic design up to 13 bar. Compressed air regulation from 0 to 8 atmospheres with a maximum flow rate of 600 l/min. Connection via 1/4" pipe...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-25 and AAFA-30. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from...
Basic 5 um air filter with 1/2" connection for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...
Air pre-filter 0,3 um with 1/4" connection for compressed air and for neutral gases with a flow rate of 500 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
Compressed air treatment unit in metal design up to 18 bar. Comprehensive treatment in one 1/2" unit with flow rates up to 2,500 l/min. All the benefits of separate parts....
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-25 and AAFR-30 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases. Inlet pressure up to 200 bar. Pressure regulation 0,5 - 50 bar. Operating...
Shut-off valve in 3/8" design with flow rate up to 2,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....
Compressed air treatment unit in metal design up to 18 bar. Lubricating grease fitting in 1/2" size with a flow rate of up to 4,300 l/min for compressed air lubrication of e.g....