Filtration, regulation and treatment of compressed air, Page 8
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Adsorption filter with activated carbon AAFA2 in 3/4" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
AAFA activated carbon filter in 1/4" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
The BFM pre-filter insert is used to remove mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm....
Replacement filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-25 and AAFP-30 filters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Hankison filter cartridge for HF series air filter type F08. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
The BFA microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre and activated carbon liner with filtration capacity...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
Magnetic differential pressure gauges to indicate the pressure gradient of the filter cartridge. MDM60E - equipped with LED signalling when the insert is dropped. Designed for...
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F07 with 3/4" female thread connection. The filter is equipped with a clogging indicator and...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge is...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases. Inlet pressure up to 200 bar. Pressure regulation 0,5 - 50 bar. Operating...
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 9,100 l/min. Connection 3/4" pipe thread. Possibility to change...
Filter cartridge for HFM filter to remove mechanical impurities and oil from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm. Working...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Hankison filter cartridge for the PF series air filter type F06. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of...
AAFM 1 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
AAFM 1" pre-filter for the removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
AAFM pre-filter in 2" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
The BFP basic filter cartridge is used to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 3 μm. Working...
The BFS microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm....
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
AAFS 1" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
Complete three-piece assembly with 1" connection and a maximum flow rate of 12,300 l/min. Inlet pressure up to 16 bar with control range : 0,5 - 10 bar. It consists of a...
Connection set for easy connection of two or more filters into one block in 3/4" threaded design. Universal design allowing the connection of filters from different...
Connection set for easy connection of two or more filters into one block in 3/8" threaded design. Universal design allowing the connection of filters from different...
Hankison filter cartridge for HF series air filter type F04. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
The HFS filter insert removes mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Working pressure...
0.01 um compressed air microfilter with 1/2" connection for compressed air and neutral gases with a flow rate of 450 l/min. Design according to ATEX II 2G2D. Maximum inlet...
AAFR dust filter in 2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFA 1" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
Adsorption filter with activated carbon AAFA2 in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
AAFA activated carbon filter in 1 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
AAFA 2" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
AAFP basic filter in 1/4" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
Hankison filter cartridge for SF series air filter type F06. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Hankison filter cartridge for SF series air filter type F02. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Replacement sintered bronze filter cartridge 15 µm for OMEGA AIR filter AAFB-198. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
The HFS filter insert removes mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Working pressure...
Adsorption filter with activated carbon AAFA2 in 1" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...