Filtration, regulation and treatment of compressed air, Page 9
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

AAFA activated carbon filter in 1 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....

AAFA activated carbon filter in 1 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....

AAFA 1" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...

AAFA activated carbon filter in 3/4" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....

0.01 um compressed air microfilter with 1/2" connection for compressed air and neutral gases with a flow rate of 450 l/min. Design according to ATEX II 2G2D. Maximum inlet...

Replacement filter insert 5 um for compact filters 1/8" - 1/4" as replacement insert for FDM and FWA air filters.

Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-780 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...

Shut-off valve in 1/4" version with flow rate up to 2,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....

Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...

Hankison filter cartridge for HF series air filter type F10. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...

Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-2160 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Standard connection set for FUTURA size 2 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...

AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...

AAFP basic filter in 1/4" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...

AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...

Filter cartridge for HFR filter to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 1 μm. Working pressure...

Replacement filter cartridge PFM for filter with filtration capacity up to 0,1 um and working pressure 16 bar. Operating temperature up to 150°C. Made of borosilicate microfibers.

Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-198. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...

Replacement filter cartridge 5 um for basic filter of FUTURA series - F34-F, F10-F. The filter insert can be easily replaced.

Replacement container for lubrication unit A2 - A2NL-12. Simple container change with lock on the following units: A2L-12, A2U-12.

Compact unit for compressed air treatment up to 13 bar. Compressed air regulation from 0 to 8 bar with a maximum flow rate of 260 l/min. Connection internal thread 1/8"....

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

The TACM-56 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...

AAFP 1" basic filter for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and designed...

Compressed air microfilter 0,01 um with 3/4" connection for compressed air and for neutral gases with flow rate 1 400 l/min. Design according to ATEX II 2G2D. Maximum inlet...

AAFP basic filter in 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...

AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...

AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...

AAFP 1" basic filter for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and designed...

AAFP basic filter in 2" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...