Tlakové nádoby s pracovním tlakem 15 bar
Společnost Air-Com Baglioni nabízí neskutečně širokou škálu tlakových nádob. Nabízíme například ty s pracovním tlakem 15 bar, a to v několika provedení. Pokud potřebujete ušetřit místo, využijte výhod stojatých vzdušníků. Se vším ostatním vám rádi poradíme, ať je výběr co nejlepší. Zavolejte nám nebo navštivte poradnu - Jak vybrat tlakovou nádobu - vzdušník.
-
Pressure vessels up to 50 l; up to 16 bar according to SPVD directive
-
Pressure vessels 100-720 l; up to 16 bar according to SPVD directive
-
Pressure vessels up to 3000 l; up to 16 bar according to PED
-
Pressure vessels equipped; fitted with TÜV certification
-
Fittings sets; accessories for vessels
-
Pressure vessels; low temperature and liquid 1
-
Pressure vessels 100-3 000 l; for vacuum accumulation -1 bar
Product sorting
List of products
The kit is designed for mounting expansion pressure vessels ∅ 50 mm to ∅ 425 mm. Includes all necessary anchoring material for installation (mounting wrench not included, we...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in 1000 mm length and straight end...
Pressure vessel "air tank" in upright design with 500 l capacity base designed for vacuum accumulation with vacuum up to -1 bar. No fittings or safety and drain valves are...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1000 mm with straight and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2000 mm and straight ends.
Pressure vessel with a volume of 50 l in a recumbent design on a base. The aerator is designed for the medium compressed air. The maximum operating pressure is 11 bar. The...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm with straight and...
Pressure vessel with a volume of 15 l in a recumbent design on a base. The aerator is designed for the medium compressed air. The maximum operating pressure is 11 bar. The...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1500 mm and straight end...
Pressure vessel without supports with a volume of 24 l in a horizontal design. The aerator is designed for compressed air medium and is made without feet. The maximum operating...
Set of fittings for complete installation of pressure vessel and air tank with volume of 100 L. The set includes the following products including all settings and documentation...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2500 mm with straight and...
Pressure vessel with a volume of 24 l in a recumbent design on a base. The aerator is designed for the medium compressed air. The maximum operating pressure is 11 bar. The...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2000 mm with straight and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/2" in length 2500 mm and straight ends.
Pressure vessel with a capacity of 24 l in upright or vertical design. The aerator is designed for the medium compressed air and is built on a base which is part of the whole...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2000 mm with straight and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2000 mm and straight end...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1500 mm and straight ends.
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm and straight end...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1500 mm with straight and...
Pressure vessel with a volume of 5 l in a recumbent design on a base. The aerator is designed for the medium compressed air. The maximum operating pressure is 11 bar. The weight...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm and straight ends.
Pressure vessel with a volume of 10 l in a recumbent design on a base. The aerator is designed for the medium compressed air. The maximum operating pressure is 11 bar. The...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2500 mm and straight ends.
Set of fittings for complete installation of pressure vessel and air tank with volume 270 L. The set includes the following products including all settings and documentation :...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 1500 mm and straight ends.
Pressure vessel with a capacity of 50 l in upright or vertical design. The aerator is designed for the medium compressed air and is built on a base which is part of the whole...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2500 mm and straight ends.
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/2" in length 1500 mm and straight ends.
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/2" in length 2000 mm and straight...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. 1" threaded version in 2000 mm length and straight end caps.