Compressed air treatment units, Page 5
-
P2 treatment units; miniature version up to 12 bar
-
Treatment units A2; basic design up to 10 bar
-
B2 treatment units; metallic design up to 18 bar
-
I3 treatment units; compact design up to 13 bar
-
I8 treatment units; robust design up to 18 bar
-
Futura treatment units; ATEX up to 16 bar
-
Combibloc treatment units; compact up to 16 bar
-
Standard treatment units; high flow design
-
Treatment units A1X; stainless steel AISI316
Bestsellers

Air treatment units A1. Simple compressed air control with 1" AR pressure regulators with 8,000 l/min air flow. Included in the delivery is a pressure gauge and fixing angle.

Air pressure regulator in metal design up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 thread 1". Regulation range 0 - 12 bar. Application mainly...

Air pressure regulator in metal design up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Application...

Air treatment units A1. Simple compressed air control with pressure regulators with AFR air filtration in 1" design with air flow of 5,500 l/min. Included in the delivery is a...

Air treatment units A1. Simple compressed air control with pressure regulators with AFR air filtration in 1/2" design with 4000 l/min air flow. Included in the delivery is a...

Air treatment units A1. Simple compressed air control with AFR pressure regulators with 1/4" air filtration and 750 l/min air flow. Included in the delivery is a pressure gauge...

Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK filters in 1/4" size.

Replacement diaphragm for A2 - A2MR-14 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...

Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK lubricators in 1/4" size.

Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK lubricators size 3/4"-1"

Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK lubricators size 3/8"-1/2".

Complete three-piece assembly with 1" connection and a maximum flow rate of 12,300 l/min. Inlet pressure up to 16 bar with control range : 0,5 - 10 bar. It consists of a...

Connection kit allowing the connection of two components from the B2 series of treatment units such as regulator, filter, lubricator of size 1.

Replacement container for filter unit A2 - A2NF-14. Simple container change with lock on the following units: A2F-14, A2S-14, A2U-14.

Connection kit allowing the connection of two components from the B2 series of treatment units such as regulator, filter, lubricator of size 3.

Size 4 mounting nut for FUTURA air treatment units such as pressure regulator or pressure regulator with filter. For mounting the angle for fixing the unit.

Fixing bracket with screws under the cover of the FUTURA size 1 unit. All modules of FUTURA units can be mounted in this way. Easily mounted with wall bracket and similar mounting.

Replacement filter cartridge 5 um for basic filter of FUTURA series - F14-F and F38-F. The filter insert can be easily replaced.

40 micron filter insert for compressed air treatment units in Combibloc design from EWO.

Standard connection set for FUTURA size 4 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...

Mounting angle for compressed air treatment units in Combibloc design from EWO.

Connection set of FUTURA air handling units with wall bracket size 4. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...

Mounting bracket with size 4 lock nut for FUTURA air handling units. Installation for pressure regulator or pressure regulator with filter. Simple attachment with a bracket....

Filter insert 5 for compressed air treatment units in Combibloc design from EWO.

Replacement filter cartridge 5 um for basic filter of FUTURA series - F382-F, F12-F. The filter insert can be easily replaced.

Mounting angle for compressed air treatment units in Combibloc design from EWO.

Air pressure shut-off valve in metal design up to 18 bar with a flow rate of 3,000 l/min in size 2 thread 1/2". Control range 0 - 12 bar. 3/2 design for venting compressed air...

Controller diaphragm for compressed air treatment units in Combibloc design from EWO.

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6670 l/min in 1 1/2" size and inlet pressure up to 16 bar. Designed for...

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

Controller diaphragm for compressed air treatment units in Combibloc design from EWO.

Replacement container for FUTURA FA filters in size 2 without condensate drain. The activated carbon in the filter only absorbs aerosols. When the liner becomes clogged, it...

Filter insert 5 for compressed air treatment units in Combibloc design from EWO.

Protective basket for compressed air treatment units in Combibloc design from EWO.

Replacement container for OL lubricator in size 1. For refilling oil to lubricate compressed air, e.g. for pneumatic tools. Suitable only for FUTURA series air handling units.